UT is generally used for the inspection of weld discontinuities,
plate laminations and shaft inspection. EC is used on electrically conductive materials, and only a small area can be inspected at a time.
plate laminations and shaft inspection. EC is used on electrically conductive materials, and only a small area can be inspected at a time.
To place an order or
for more informations
call:
Quebec: (450) 691-9090
Ontario: (519) 894-9069
for more informations
call:
Quebec: (450) 691-9090
Ontario: (519) 894-9069
RT is used to produce a visual picture. X-ray is generally used for steel 1/8" thick or less, or material less dense than steel, such as aluminum.
Gammaray is used for material such as steel usually over 1/8" thick.
Gammaray is used for material such as steel usually over 1/8" thick.
LPI is used to detect surface discontinuities in non-porous materials.
MPI is used for detection of surface and near-to-surface discontinuities
in ferromagnetic materials.
MPI is used for detection of surface and near-to-surface discontinuities
in ferromagnetic materials.
Select one of the following for more details
Sales,
Rental,
Repair,
Calibration.
Rental,
Repair,
Calibration.
There is no need
to look further:
Quality NDE Ltd.
for all your NDT supplies
Let us be your partner in
Quality
to look further:
Quality NDE Ltd.
for all your NDT supplies
Let us be your partner in
Quality
Quality NDE Limited
RVI makes it possible to see inside small manufactured parts as a
Quality Control Inspection measure.
Quality Control Inspection measure.
AE testing is a powerful method for examining the behavior of materials deforming under stress.
Coating Thickness Gauges, Hardness Tester, UT Leak Detection,
Spot Weld Inspections, Non-Contact Thermometers.
Spot Weld Inspections, Non-Contact Thermometers.
Committed to Quality for over 30 years
Repair, calibration, preventative maintenance: in-house or at your facilities.